Drywall Sanding

Drywall Sanding

A Beginners Guide on How to Tape Drywall

Working on a home improvement project can be a lot of fun. However, it can also be a disaster if you don’t know what you are doing. If you don’t know anything about how to tape drywall, then it may be time for you to learn. This is one of the most important skills that you need to learn as a do it yourselfer.

First of all, you need to remember that knowing how to tape drywall is not really that hard to do. However, you have to keep in mind that there is a process to this and you shouldn’t try and cut corners with this one as you will only end up with a drywall installation job that is not at par with what you really want.

To get the job done, you obviously need to have the proper tools and techniques. You need to keep in mind that patience is really a virtue if you are on the process of taping drywall. It’s time consuming and you have to keep in mind that this involves a detailed process. In fact, taping the drywall seams can even take 3 times as long as it takes to hand the drywall.

You have to know how to tape drywall properly because without following the correct process, you will eventually get an unattractive and unprofessional finish. So, here are some instructions on how to complete this kind of project properly in order for you to have great results on the finished taping drywall project.

First, you have to have the right tools for the job. You need to understand the fact that knowing how to tape drywall and having the right tools is half the battle. Although it is possible for you to get the job done without having all the right tools, it may take a lot longer to finish the project than usual.

To tape drywall, you will need a drywall tape, joint compound, and also a good sized drywall knife. You will also need coarse and fine grit sandpaper in order for you to finish the job. Having these tools will make your project a lot easier and it will also help you produce a more professional look.

Taping drywall involves knowing the entire process involved in finishing drywalls. It is important for you to understand this process because it will affect the way the finished project look.

Before applying the tape, you first need to apply drywall joint compound on each joint. You may want to apply three layers of the compound and after each layer you have to let it dry completely. Then, sand it and repeat the process three times.

After applying the last layer of joint compound, the next step is to tape the joints.

You have to tape the joints between each sheet of drywall. Then, you have to fill it with drywall compound. After applying the tape is applied, you now have to smooth the drywall compound by using a caulking knife.

Lastly, you have to dry the compound completely and you have to sand it with coarse grit sandpaper first and then the fine grit sandpaper for a smooth and polished look.

These are the proper ways on how to tape drywall. Although it may seem simple, you will find that taping drywall can take some time and patience. With these tips, you can be sure that you will be able to have the necessary knowledge that will give you a more professional look upon finishing the project.

About the Author

If you don’t know anything about how to tape drywall, then it may be time for you to learn.

For more useful information and great advice please visit my site:

A Beginners Guide On How To Tape Drywall

Is it safe for small dogs and children to be around and inhaling drywall dust?

I have 2 toy dogs and 3 kids all under 10 we are sanding our drywall is it safe to have them in the house...it is poorly ventilated too

No it is not safe. When you work with drywall you have to use a mask for you and to keep the place very well ventilated. Also use a vacuum cleaner attachment - you can rent one.

Many details here

http://handyowner.com/category/drywall/

Home Improvement & Maintenance Tips : Drywall Sanding Tips